水热法制备Nd3+-介孔TiO2/GO复合材料及光催化性能研究

采用水热法首先制备稀土Nd3+掺杂介孔TiO2,进而复合氧化石墨烯(GO)合成了系列Nd3+-介孔TiO2/GO复合材料.通过X射线衍射(XRD)、透射电镜(TEM)、孔结构分析(BJH与BET)、X射线光电子能谱(XPS)和紫外-可见漫反射(UV-vis)等测试手段对样品的微观结构、形貌、样品表面各元素价态及谱学性质进行表征,并以甲基橙模拟污染物测试其光催化性能.结果表明,所制样品均为锐钛矿结构TiO2,晶粒尺寸在3~4 nm之间;从UV-vis测试结果分析可知,与Nd3+-介孔TiO2和TiO2/GO相比,稀土Nd3+和GO的协同效应更能有效减小TiO2半导体禁带宽度,从而增加其对可见光的吸收.此外,不同光照射下光催化降解甲基橙的实验表明,所制备样品均有较强的紫外及可见光光催化性能,其中系列Nd3+-介孔TiO2/GO复合体系可见光光催化性能更为显著.     

PLA/EMAG共混物的制备与表征

通过熔融共混挤出法制备了不同乙烯-丙烯酸甲酯-甲基丙烯酸缩水甘油酯(EMAG)含量下的聚乳酸(PLA)/EMAG共混物,考察共混体系中EMAG与PLA基体之间的相互作用,研究了PLA/EMAG共混物的结晶性能、力学性能、熔体指数、加工性能以及热稳定性.表征结果显示:EMAG中的环氧基团与PLA的端羟基或端羧基发生化学反应,形成反应性共混体系,PLA/EMAG共混物的韧性较纯PLA有大幅提高,在EMAG含量为15;时达到最大.     

ZnO-PSAⅡ型异质结界面电荷转移过程研究

采用稳态光致发光光谱和纳秒时间分辨瞬态光谱(NTRT-PL)表征,揭示ZnO-PSA II型纳米异质结光生载流子电荷转移过程,通过甲基橙光降解实验,测得ZnO-NRs和ZnO-PSA紫外光降解率分别为25.5;和60.1;,光降解率提高到2.4倍,表明II型异质结相对于单一半导体而言,能促进光生载流子在界面间电荷转移,有利于载流子的分离.     

Comparative pharmacokinetic study of four major bioactive components after oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and corticosterone‐induced depressive rats

A highly selective and efficient LC–MS/MS method was developed to determine the plasma concentration of magnolol, hesperidin, neohesperidin and geniposide following oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and depressed rats. Plasma samples were pretreated by protein precipitation with methanol. Chromatographic separation was performed on an XTerra^® MS C₁₈ column using a gradient elution with a mobile phase composed of acetonitrile–0.1% aqueous formic acid. The proposed method was validated to be specific, accurate and precise for the analytes determination in plasma samples. The calibration curves displayed good linearity over definite concentration ranges for the analytes. The intra‐ and inter‐day precision of the proposed method at three different levels were all within <11.13% and the relative errors ranged from ?8.46 to 8.93%. The recovery of the four compounds ranged from 82.72 to 89.08% and no apparent matrix effect was observed during sample analysis. After full validation, the established method was successfully applied for comparing the pharmacokinetics of four components between normal and depressed rats. The results showed that the AUC and C_max of four analytes in depressed rats were significantly different from those in normal rats and might provide helpful information to guide the clinical use of Zhi‐Zi‐Hou‐Po to treat depression.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.     

COMPUTER-ASSISTED TEACHING REFORM FOR THEORETICAL MECHANICS 1)

本文依照四川大学某理论力学教学班实际教学改革的经验,通过具体举例说明计算机技术在理论力学教学中尚未开发的巨大潜力,减小数学运算使学生重点关注理论力学基本原理,批量求解使学生提前接触实际应用案例,普适性求解使学生深化对处理多变量问题的认识。同时本文还探讨了理论力学教学改革的方向和目的,即把教学重点放在普适的教学方法上,借助计算机求解多刚体、多变量问题,以期有助于理论力学教材更好地适应时代发展。     

Synthesis of Tri‐ and Difluoromethoxylated Compounds by Visible‐Light Photoredox Catalysis

Trifluoromethoxy (OCF₃) and difluoromethoxy (OCF₂H) groups are fluorinated structural motifs that exhibit unique physicochemical characteristics. Incorporation of these substituents into organic molecules is a highly desirable approach used in medicinal chemistry and drug discovery processes to alter the properties of a parent compound. Recently, tri‐ and difluoromethyl ethers have received increasing attention and several innovative strategies to access these valuable functional groups have been developed. The focus of this Minireview is the use of visible‐light photoredox catalysis in the synthesis of tri‐ and difluoromethyl ethers. Recent photocatalytic strategies for the formation of O?CF₃, C?OCF_3, O?CF₂H, and C?OCF₂H bonds as well as other transformations leading to the construction of OR_F groups are discussed herein.     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.     

保温层结构对感应加热制备太阳能级多晶硅影响的数值模拟研究

定向凝固技术是制备太阳能级多晶硅的主要制备技术.在该技术路线之中,优化多晶铸锭炉的热场结构和控制硅熔体的对流形态是获得高品质多晶硅的有效途径之一.本文设计了三种热场保温层,通过分析不同保温层下坩埚内硅熔体的热场、流场、固液界面、氧含量等的变化,确定了优化的保温层结构.研究发现,在传统固化碳毡保温层中引入石墨层可以使多晶炉内形成两个“热源”,提高多晶炉的热效率,使其能耗降低了38.5;;在洛伦兹力的作用下硅熔体中仅存在一个上下贯通的涡流,有利于硅中杂质原子的挥发.同时,添加石墨保温层后固液界面的形状由“W”状转变为凹状,其上的氧含量有所降低,并且V/Gn值在整个固液界面范围内均大于临界值,可以有效抑制氧沉淀.可见,在感应加热多晶硅生长系统中,采用固化碳毡+石墨保温层时,有利于降低多晶硅的生产成本并提高多晶硅的品质.     

甲烷-二氧化碳重整制合成气与现代分析技术应用于探究性化工专业实验的设计与探索

以甲烷-二氧化碳重整制合成气为实例，设计探究性实验，将合成气的制备和现代分析技术应用于化工专业实验的教学实践中以提高学生的创新和实践能力。实验包括催化剂的制备，催化剂的性能评价和催化剂的表征等3大部分。采用工业最常用的浸渍法制备含有不同助剂的Ni/X/γ-Al2O3（X为Co，Fe，MgO，CeO2）催化剂，以甲烷-二氧化碳重整反应评价其催化性能，并采用XRD、H2-TPR、BET和TG对催化剂的微观结构进行表征。结合催化剂的性能评价结果和表征结果，探讨不同助剂对镍基催化剂性能的改善效果及机制。通过开设该实验，可以让学生了解化工学科的前沿知识以及现代分析技术的基本原理和用途，掌握专业的实验操作、数据处理和谱图绘制方法，提高学生的专业素养和综合能力。